Developing lightweight computation at the DSG edge

qmp_functions.sh 23.2 KB
Newer Older
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
#!/bin/sh
#/etc/rc.common
#    Copyright (C) 2011 Fundacio Privada per a la Xarxa Oberta, Lliure i Neutral guifi.net
#
#    This program is free software; you can redistribute it and/or modify
#    it under the terms of the GNU General Public License as published by
#    the Free Software Foundation; either version 2 of the License, or
#    (at your option) any later version.
#
#    This program is distributed in the hope that it will be useful,
#    but WITHOUT ANY WARRANTY; without even the implied warranty of
#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#    GNU General Public License for more details.
#
#    You should have received a copy of the GNU General Public License along
#    with this program; if not, write to the Free Software Foundation, Inc.,
#    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
#
#    The full GNU General Public License is included in this distribution in
#    the file called "COPYING".
#
# Contributors:
p4u's avatar
p4u committed
23
#	Axel Neumann
24
#	Pau Escrich <p4u@dabax.net>
25
26
27
28
29
30
31
32
33
#	Simó Albert i Beltran
#

QMP_PATH="/etc/qmp"
SOURCE_FUNCTIONS=1

#######################
# Importing files
######################
34
35
36
37
38
if [ -z "$SOURCE_OPENWRT_FUNCTIONS" ]
then
	. /lib/functions.sh
	SOURCE_OPENWRT_FUNCTIONS=1
fi
39
40
41
42
43
44
45
46
. $QMP_PATH/qmp_common.sh
[ -z "$SOURCE_GW" ] && . $QMP_PATH/qmp_gw.sh
[ -z "$SOURCE_NET" ] && . $QMP_PATH/qmp_network.sh

# requires ip ipv6calc awk sed grep

qmp_get_llocal_for_dev() {
  local dev=$1
47
  ip a show dev $dev | awk '/inet6/{print $2}'
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
}

# returns primary device
qmp_get_primary_device() {
  local primary_mesh_device="$(uci get qmp.node.primary_device)"
  [ -z "$primary_mesh_device" ] && 
      {
      if ip link show dev eth0 > /dev/null; then
        primary_mesh_device="eth0"
      else
        primary_mesh_device="$(ip link show | awk '!/lo:/&&/^[0-9]?:/{sub(/:$/,"",$2); print $2; exit}')"
      fi
      [ -z "$primary_mesh_device" ] && echo "CRITICAL: No primary network device found, please define qmp.node.primary_device" 
      }
  echo "$primary_mesh_device"
}

65
# check if a device exists
66
67
68
69
70
71
72
qmp_check_device() {
	ip link show $1 1> /dev/null 2>/dev/null
	return $?
}

qmp_set_vlan() {
  local viface="$1" # lan/wan/meshX
73
  local vid=$2
74
75
76
77
78
79
80
81
82
83
84
85
  [ -z "$viface" ] || [ -z "$vid" ] && return

  uci set network.${viface}_$vid=interface
  uci set network.${viface}_$vid.proto=none
  uci set network.${viface}_$vid.ifname=@$viface.$vid
  uci commit network
}

qmp_get_virtual_iface() {
  local device="$1"
  local viface=""

86
87
88
89
90
91
92
93
94
  if qmp_is_routerstationpro; then
    if [ "$device" == "eth1" ]; then
      echo "rsp_e1"
      return
    fi
    if [ "$device" == "eth1.1" ]; then
      echo "rsp_e1_1"
      return
    fi
95
96
  fi

97
   # is lan?
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
  if [ "$device" == "br-lan" ]; then
    viface="lan"
    echo $viface
    return
  fi

  for l in $(qmp_get_devices lan); do 
    if [ "$l" == "$device" ]; then 
      viface="lan"
      echo $viface
      return
    fi
  done

  [ -n "$viface" ] && { echo $viface; return; }

  # id is the first and char and the numbers of the device [e]th[0] [w]lan[1]
115
  local id_num=$(echo $device | tr -d "[A-z]" | tr - _ | tr . _)
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
  local id_char=$(echo $device | cut -c 1)

  # is wan
  for w in $(qmp_get_devices wan); do 
   if [ "$w" == "$device" ]; then
     viface="wan_${id_char}${id_num}"
     echo $viface
     return
   fi
  done

  # is mesh
  for w in $(qmp_get_devices mesh); do 
   if [ "$w" == "$device" ]; then
     viface="mesh_${id_char}${id_num}"
     break
   fi
  done
  
  echo "$viface" 
}

# arg1=<mesh|lan|wan>, returns the devices which have to be configured in such mode
qmp_get_devices() {
  local devices=""

  if [ "$1" == "mesh" ]; then 
    local brlan_enabled=0
    for dev in $(uci get qmp.interfaces.mesh_devices 2>/dev/null); do

        # Lookging if device is defined as LAN, in such case dev=br-lan, but only once
147
148
149
150
151
152
153
154
155
156
        # except eth1 for RouterStation Pro
        if ! ( [[ "$dev" == "eth1" ]] && qmp_is_routerstationpro ) ; then
            for landev in $(uci get qmp.interfaces.lan_devices 2>/dev/null); do
                if [ "$landev" == "$dev" ]; then
                    if [ $brlan_enabled -eq 0 ]; then
                        dev="br-lan"
                        brlan_enabled=1
                    else
                        dev=""
                    fi
157
                    break
158
                fi
159
160
            done
        fi
161
162
163
164
165
166
167
168
169
170
171
172
173

      [ -n "$dev" ] && devices="$devices $dev"
    done
  fi

  if [ "$1" == "lan" ]; then
     devices="$(uci get qmp.interfaces.lan_devices 2>/dev/null)"
  fi

  if [ "$1" == "wan" ]; then
     devices="$(uci get qmp.interfaces.wan_devices 2>/dev/null)"
  fi

174
175
176
177
  if qmp_is_routerstationpro && [ "$1" == "wan" -o "$1" == "lan" ]; then
     devices="$(echo $devices | sed -e "s/\beth1\b/eth1.1/g")"
  fi

178
179
180
181
  echo "$devices"
}


182
183
# Scan and configure the network devices (lan, mesh and wan)
# if $1 is set to "force", it rescan all devices 
184
185
186
187
qmp_configure_smart_network() {
	echo "---------------------------------------"
	echo "Starting smart networking configuration"
	echo "---------------------------------------"
188
	local force=$1
189
190
191
192
193
	local mesh=""
	local wan=""
	local lan=""
	local dev=""
	local phydevs=""
194
195
196
197
198
	local ignore_devs=""
	
	[ "$force" != "force" ] && {
		ignore_devs="$(qmp_uci_get interfaces.ignore_devices)"
	}
199

200
	for dev in $(ls /sys/class/net/); do
201
		[ -e /sys/class/net/$dev/device ] || [ dev == "eth0" ] && {
202
203
			local id 
			local ignore=0
204
			
205
			# Check if device is in the ignore list
206
207
208
209
				for id in $ignore_devs; do
					[ "$id" == "$dev" ] && ignore=1
				done

210
			[ $ignore -eq 0 ] && phydevs="$phydevs $dev\n"
211
		}
212
213
214
	done

	phydevs="$(echo -e "$phydevs" | grep -v -e ".*ap$" | grep -v "\\." | sort -u | tr -d ' ' \t)"
215
	
216
217
218
219
220
221
	# if force is not enabled, we are not changing the existing lan/wan/mesh (only adding new ones)
	[ "$force" != "force" ] && {
		lan="$(qmp_uci_get interfaces.lan_devices)"
		wan="$(qmp_uci_get interfaces.wan_devices)"
		mesh="$(qmp_uci_get interfaces.mesh_devices)"
	}
222

223
224
	local j=0
	local mode=""
225
226
	local cnt
	local cdev
227

228
	for dev in $phydevs; do
229
230
231
232
		# If force is enabled, do not check if the device is already configured		
		[ "$force" != "force" ] && {
			cnt=0
			# If it is already configured, doing nothing
233
			for cdev in $lan; do
234
				[ "$cdev" == "$dev" ] && cnt=1
235
			done
236
			for cdev in $mesh; do
237
				[ "$cdev" == "$dev" ] && cnt=1
238
			done
239
			for cdev in $wan; do
240
				[ "$cdev" == "$dev" ] && cnt=1
241
242
243
			done
			[ $cnt -eq 1 ] && continue
		}
244
245
		
		# If not found before...
246
247
248
249
250
251
252
253
		[ "$dev" == "eth0" ] && {
			lan="$lan eth0"
			mesh="$mesh eth0"
			continue
		}

		## if there is not yet a LAN device, configuring as lan and mesh
		##[ -z "$lan" ] && { lan="$dev"; mesh="$dev" && continue
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275

		# if it is a wifi device
		[ -e "/sys/class/net/$dev/phy80211" ] && {
			j=0
			while qmp_uci_test qmp.@wireless[$j]; do
				[ "$(qmp_uci_get @wireless[$j].device)" == "$dev" ] && {
					mode="$(qmp_uci_get @wireless[$j].mode)"
					[ "$mode" == "ap" ] && lan="$dev $lan" || mesh="$dev $mesh"
					break
				}
				j=$(($j+1))
			done
		} && continue

		# if there is already LAN device and it is not wifi, use as WAN
		[ -z "$wan" ] && wan="$dev" && continue
		
		# else use as LAN and MESH
		lan="$dev $lan"
		mesh="$dev $mesh"
	done
	
276
	echo "Network devices found:"
277
278
279
280
	echo "- LAN $lan"
	echo "- MESH $mesh"
	echo "- WAN $wan"

281
	# Writes the devices to the config
282
283
284
	qmp_uci_set interfaces.lan_devices "$(echo $lan | sed -e s/"^ "//g -e s/" $"//g)"
	qmp_uci_set interfaces.mesh_devices "$(echo $mesh | sed -e s/"^ "//g -e s/" $"//g)"
	qmp_uci_set interfaces.wan_devices "$(echo $wan | sed -e s/"^ "//g -e s/" $"//g)"
285
	qmp_uci_set interfaces.ignore_devices "$ignore_devs"
286
287
}

288
289
qmp_attach_device_to_interface() {
	local device=$1
290
291
292
	local interface=$2
	local intype="$(qmp_uci_get_raw network.$interface.type)" 
	
293
	echo "Attaching device $device to interface $interface"
294
295

	# is it a wifi device?
296
	if qmp_uci_test wireless.$device; then
297
		qmp_uci_set_raw wireless.$device.network=$interface
298
		echo " -> $device wireless attached to $interface"
299
300

	# if it is not
301
	else
302
			if [ "$intype" == "bridge" ]; then
303
				qmp_uci_add_list_raw network.$interface.ifname=$device
304
305
				echo " -> $device attached to $interface bridge"
			else
306
				qmp_uci_set_raw network.$interface.ifname=$device
307
308
				echo " -> $device attached to $interface"
			fi
309
310
311
	fi
}

312
313
314
315
316
317
318
319
320
321
322
323
324
325
qmp_is_routerstationpro() {
	cat /proc/cpuinfo | grep -q "^machine[[:space:]]*: Ubiquiti RouterStation Pro$"
}

qmp_configure_routerstationpro_switch() {
	local vids="$@"

	uci set network.eth1="switch"
	uci set network.eth1.enable="1"
	uci set network.eth1.enable_vlan="1"
	uci set network.eth1.reset="1"

	uci set network.mesh_ports_vid1="switch_vlan"
	uci set network.mesh_ports_vid1.vlan="1"
326
	uci set network.mesh_ports_vid1.vid="1"
327
328
329
330
331
332
333
334
335
336
337
	uci set network.mesh_ports_vid1.device="eth1"
	uci set network.mesh_ports_vid1.ports="0t 4"
      
	for vid in $vids
	do
		uci set network.mesh_ports_vid$vid="switch_vlan"
		uci set network.mesh_ports_vid$vid.vlan="$vid"
		uci set network.mesh_ports_vid$vid.vid="$vid"
		uci set network.mesh_ports_vid$vid.device="eth1"
		uci set network.mesh_ports_vid$vid.ports="0t 2t 3t"
	done
338
339
340
341
342
343

	local viface="$(qmp_get_virtual_iface eth1)"
	uci set network.$viface="interface"
	uci set network.$viface.proto="static"
	uci set network.$viface.ifname="eth1"
	uci commit network
344
345
}

346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
qmp_get_ip6_slow() {
  local addr_prefix="$1"
  local addr="$(echo $addr_prefix | awk -F'/' '{print $1}')"
  local mask="$(echo $addr_prefix | awk -F'/' '{print $2}')"

  echo "qmp_get_ip6_slow addr_prefix=$addr_prefix addr=$addr mask=$mask" 1>&2

  if [ -z "$mask" ] ; then
    mask="128"
  fi

  local addr_in=$addr
  local addr_out=""
  local found=0

  while ! [ -z "$addr_in" ] ; do

    addr_in=$( echo $addr_in | sed -e "s/^://g" )

    if echo "$addr_in" | grep "^:"  >/dev/null 2>&1 ; then

      if echo "$addr_in" | grep "::"  >/dev/null 2>&1 ; then
        echo "Invalid 1 IPv6 address $addr_prefix" 1>&2
        return 1
      fi

      addr_in=$( echo $addr_in | sed -e "s/^://g" )

      if [ -z "$addr_in" ] ; then
        addr_out="$addr_out::"
      else
        addr_out="$addr_out:"
      fi

    else

      local addr16="$(echo $addr_in | awk -F':' '{print $1}')"
      addr_in=$( echo $addr_in | sed -e "s/^$addr16//g" )

      if [ -z "$addr_out" ] ; then
	addr_out="$addr16"
      else
	addr_out="$addr_out:$addr16"
      fi

      if echo "$addr16" | grep '\.'  >/dev/null 2>&1 ; then
        found=$(( $found + 2 ))
      else
        found=$(( $found + 1 ))
      fi

    fi

  done

  if echo $addr_out | grep "::" >/dev/null 2>&1 && [ "$found" -lt "8" ] ; then

    local insert="0"
    for n in $( seq $found "6" ) ; do
      insert="$insert:0"
    done

    addr_out=$( echo $addr_out | sed -e "s/^::$/$insert/g" )
    addr_out=$( echo $addr_out | sed -e "s/^::/$insert:/g" )
    addr_out=$( echo $addr_out | sed -e "s/::$/:$insert/g" )
    addr_out=$( echo $addr_out | sed -e "s/::/:$insert:/g" )

  elif echo $addr_out | grep "::"  >/dev/null 2>&1 || [ "$found" != "8" ] ; then
    echo "Invalid 2 IPv6 address $addr_prefix found=$found" 1>&2
    return 1
  fi


#  echo "Correct IPv6 address $addr_prefix addr_out=$addr_out found=$found" 1>&2
  local pos=0
  addr_in=$addr_out
  addr_out=""

  while ! [ -z "$addr_in" ] ; do

    addr_in=$( echo $addr_in | sed -e "s/^://g" )

    local addr16="$( echo $addr_in | awk -F':' '{print $1}' )"
    addr_in=$( echo $addr_in | sed -e "s/^$addr16//g" )

    if echo $addr16 | grep '\.' >/dev/null 2>&1  ; then
      local ip1=$( echo $addr16 | awk -F'.' '{print $1}' )
      local ip2=$( echo $addr16 | awk -F'.' '{print $2}' )
      local ip3=$( echo $addr16 | awk -F'.' '{print $3}' )
      local ip4=$( echo $addr16 | awk -F'.' '{print $4}' )

#      echo "addr16=$addr16 ip1=$ip1 ip2=$ip2 ip3=$ip3 ip4=$ip4" 1>&2

      addr16=$( printf "%X" $(( $(( $ip1 * 0x100 )) + $ip2 )) )

      if [ -z "$ip4" ] ; then
        echo "Invalid 3 IPv6 address $addr_prefix" 1>&2
        return 1
      fi

      addr_in=$( printf "%X" $(( $(( $ip3 * 0x100 )) + $ip4 )) )$addr_in


    fi

    local prefix16
    if [ "$pos" -le "$mask" ] ; then

      if [ "$(( $pos + 16 ))" -le "$mask" ] ; then
	prefix16=$addr16
      else
	prefix16=$( printf "%X" $(( 0x$addr16 & 0xFFFF<<$(( $(( $pos + 16 )) - $mask )) )) )
      fi

    else
      prefix16="0"
    fi


    if [ -z "$addr_out" ] ; then
      addr_out="$prefix16"
    else
      addr_out="$addr_out:$prefix16"
    fi

    pos=$(( $pos + 16 ))

  done

  echo "$addr_out"
}

qmp_get_ip6_fast() {

  if ! [ -x /usr/bin/ipv6calc ] ; then
     qmp_get_ip6_slow $1
     return $?
  fi

  local addr_prefix="$1"
  local addr="$(echo $addr_prefix | awk -F'/' '{print $1}')"
  local mask="$(echo $addr_prefix | awk -F'/' '{print $2}')"

  if [ -z "$mask" ] ; then
    echo "qmp_get_ip6_fast: ERROR addr_prefix=$addr_prefix addr_long=$addr_long  addr=$fake_long mask=$mask" 1>&2
    return 1
    mask="128"
  fi

495
  local addr_long=$( ipv6calc -q  --in ipv6 $addr --showinfo -m 2>&1 | awk -F'=' '/IPV6=/{print $2}' )
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601

  local fake_prefix16="20a2" # original input is manipulated because ipv6calc complains about reserved ipv6 addresses
  local addr_prefix16="$(echo $addr_long | awk -F':' '{print $1}')"
  local fake_long=$( echo $addr_long | sed -e "s/^$addr_prefix16/$fake_prefix16/g" )
  local fake_out

#  echo "qmp_get_ip6_fast: begin addr_prefix=$addr_prefix addr_long=$addr_long  addr=$fake_long mask=$mask" 1>&2

  if [ "$mask" -ge "0" ] &&  [ "$mask" -le "112" ] && [ "$(( $mask % 16))" = "0" ]; then

    fake_out="$( ipv6calc --in ipv6 $fake_long/$mask -F --printprefix --out ipv6addr 2>/dev/null )::/$mask"

  else

    if [ "$(( $mask % 16))" != "0" ]; then
      echo "ERROR addr_prefix=$1 mask=$mask must be multiple of 16" 1>&2
      return 1
    fi

    fake_out="$( ipv6calc --in ipv6 $fake_long/128 -F --printprefix --out ipv6addr 2>/dev/null )"
  fi

  echo $fake_out | sed -e "s/^$fake_prefix16/$addr_prefix16/g"

#  echo "qmp_get_ip6_fast: return addr_prefix=$addr_prefix addr_long=$addr_long  addr=$fake_long mask=$mask" 1>&2
}

qmp_calculate_ula96() {

  local prefix=$1
  local mac=$2
  local suffix=$3

  local prefix48=$( qmp_get_ip6_fast $prefix/128 )
  local suffix48=$( qmp_get_ip6_fast $suffix/128 )

# echo "qmp_calculate_ula96 suffix48=$suffix48" 1>&2

  local mac1="$( echo $mac | awk -F':' '{print $1}' )"
  local mac2="$( echo $mac | awk -F':' '{print $2}' )"
  local mac3="$( echo $mac | awk -F':' '{print $3}' )"
  local mac4="$( echo $mac | awk -F':' '{print $4}' )"
  local mac5="$( echo $mac | awk -F':' '{print $5}' )"
  local mac6="$( echo $mac | awk -F':' '{print $6}' )"

  local p1="$( echo $prefix48 | awk -F':' '{print $1}' )"
  local p2="$( echo $prefix48 | awk -F':' '{print $2}' )"
  local p3="$( echo $prefix48 | awk -F':' '{print $3}' )"

  local s1="$( echo $suffix48 | awk -F':' '{print $7}' )"
  local s2="$( echo $suffix48 | awk -F':' '{print $8}' )"

  printf "%X:%X:%X:%X:%X:%X:%X:%X\n" 0x$p1 0x$p2 0x$p3  $(( ( 0x$mac1 * 0x100 ) + 0x$mac2 ))  $(( ( 0x$mac3 * 0x100 ) + 0x$mac4 ))  $(( ( 0x$mac5 * 0x100 ) + 0x$mac6 ))  0x$s1 0x$s2

}

qmp_calculate_addr64() {

  local prefix=$1
  local node=$2
  local suffix=$3

  local prefix48=$( qmp_get_ip6_fast $prefix/128 )
  local suffix48=$( qmp_get_ip6_fast $suffix/128 )

  local p1="$( echo $prefix48 | awk -F':' '{print $1}' )"
  local p2="$( echo $prefix48 | awk -F':' '{print $2}' )"
  local p3="$( echo $prefix48 | awk -F':' '{print $3}' )"

  local s5="$( echo $suffix48 | awk -F':' '{print $5}' )"
  local s6="$( echo $suffix48 | awk -F':' '{print $6}' )"
  local s7="$( echo $suffix48 | awk -F':' '{print $7}' )"
  local s8="$( echo $suffix48 | awk -F':' '{print $8}' )"

  printf "%X:%X:%X:%X:%X:%X:%X:%X\n" 0x$p1 0x$p2 0x$p3   0x$node   0x$s5 0x$s6 0x$s7 0x$s8

}

qmp_get_ula96() {

  local prefix=$1
  local dev_mac=$2
  local suffix=$3
  local mask=$4

  local mac=$( qmp_get_mac_for_dev $dev_mac )
  local ula96=$( qmp_calculate_ula96 $prefix $mac $suffix )

  if [ -z "$mask" ] ; then
      echo "$ula96"
  else
      echo "$ula96/$mask"
  fi
}

qmp_get_addr64() {
  local prefix=$1
  local node=$2
  local suffix=$3
  local mask=$4
  local addr64=$( qmp_calculate_addr64 $prefix $node $suffix )
  echo "$addr64/$mask"
}

qmp_configure_prepare() {
  local conf=$1
p4u's avatar
p4u committed
602
   if ! [ -f /etc/config/$conf.orig ]; then
603
604
605
606
607
608
609
610
611
612
613
614
    echo "saving original config in: /etc/config/$conf.orig"
    cp /etc/config/$conf /etc/config/$conf.orig
  fi

  uci revert $conf
  echo "" > /etc/config/$conf
}

qmp_configure_network() {

  local conf="network"

p4u's avatar
p4u committed
615
616
617
618
  echo "-----------------------"
  echo "Configuring networking"
  echo "-----------------------"

619
620
621
  qmp_configure_prepare_network $conf
  
  # LoopBack device
622
623
624
625
626
627
628
  uci set $conf.loopback="interface"
  uci set $conf.loopback.ifname="lo"
  uci set $conf.loopback.proto="static"
  uci set $conf.loopback.ipaddr="127.0.0.1"
  uci set $conf.loopback.netmask="255.0.0.0"

  # WAN devices
629
630
  qmp_configure_wan
  # LAN devices
631
  qmp_configure_lan
632
633
  # MESH devices
  qmp_configure_mesh
634
  
635
636
637
638
  uci commit
}


639
qmp_remove_qmp_bmx6_tunnels()
640
641
{	
	if echo "$1" | grep -q "^qmp_"
642
643
644
	then
		uci delete bmx6.$1
	fi
645
	uci commit bmx6
646
647
648
649
650
651
}

qmp_unconfigure_bmx6_gateways()
{
	config_load bmx6
	config_foreach qmp_remove_qmp_bmx6_tunnels tunInNet
652
653
	config_foreach qmp_remove_qmp_bmx6_tunnels tunDev
	config_foreach qmp_remove_qmp_bmx6_tunnels tunIn
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
	config_foreach qmp_remove_qmp_bmx6_tunnels tunOut
}

qmp_translate_configuration()
{
	orig_config=$1
	orig_section=$2
	orig_option=$3

	dest_config=$4
	dest_section=$5
	dest_option=${6:-$orig_option}

	value="$(uci -q get $orig_config.$orig_section.$orig_option)"
	if [ -n "$value" ]
	then
		uci set $dest_config.$dest_section.$dest_option="$value"
	fi
}

qmp_add_qmp_bmx6_tunnels()
{
	local section=$1
677
	local name="$section"
678
679
	local config=bmx6
	local ignore
680
	local t
681
	config_get ignore "$section" ignore
682
683
684
	
	[ "$ignore" = "1" ] && return
	
685
686
	local type="$(qmp_uci_get_raw gateways.$name.type)"
	qmp_log Configuring gateway $name of type $type
687
	[ -z "$name" ] && name="qmp_$gateway" || name="qmp_$name"
688
689

	if [ "$type" == "offer" ]
690
	then
691
		bmx6_type=tunIn
692
		uci set $config.$name="$bmx6_type"
693
		uci set $config.$name.$bmx6_type="$name"
694
695
696
697
		for t in network address bandwidth
		do		
			qmp_translate_configuration gateways $section $t $config $name
		done
698
699
700
	else
		bmx6_type=tunOut
		uci set $config.$name="$bmx6_type"
701
		uci set $config.$name.$bmx6_type="$section"
702
703
704
		for t in network gwName address minPrefixLen maxPrefixLen hysteresis bonus \
			tableRule minBandwidth exportDistance
		do		
705
			qmp_translate_configuration gateways $section $t $config $name
706
		done
707
708
709
710
711
712
713
714
	fi
	
	gateway="$(($gateway + 1))"
}

qmp_configure_bmx6_gateways()
{
	qmp_unconfigure_bmx6_gateways
715
	config_load gateways
716
717
	gateway=0
	config_foreach qmp_add_qmp_bmx6_tunnels gateway
718
	uci commit bmx6
719
720
}

721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744

qmp_configure_bmx6() {
  local conf="bmx6"

  qmp_configure_prepare $conf
  uci set $conf.general="bmx6"
  uci set $conf.bmx6_config_plugin=plugin
  uci set $conf.bmx6_config_plugin.plugin=bmx6_config.so

  uci set $conf.bmx6_json_plugin=plugin
  uci set $conf.bmx6_json_plugin.plugin=bmx6_json.so

  uci set $conf.bmx6_sms_plugin=plugin
  uci set $conf.bmx6_sms_plugin.plugin=bmx6_sms.so

  # chat file must be syncronized using sms
  cfg_sms=$(uci add $conf syncSms)
  uci set $conf.${cfg_sms}.syncSms=chat

  uci set $conf.ipVersion=ipVersion
  uci set $conf.ipVersion.ipVersion="6"

  local primary_mesh_device="$(qmp_get_primary_device)"

745
  local community_node_id=$(qmp_get_id)
746

747
  if qmp_uci_test qmp.interfaces.mesh_devices && 
748
749
  qmp_uci_test qmp.networks.mesh_protocol_vids
  
750
    then
751
752
    local counter=1

753
754
	for dev in $(qmp_get_devices mesh); do
	for protocol_vid in $(uci get qmp.networks.mesh_protocol_vids); do
755

756
	local protocol_name="$(echo $protocol_vid | awk -F':' '{print $1}')"
757
	
758
	if [ "$protocol_name" = "bmx6" ] ; then
759
	    
760
761
762
	# Check if the current device is configured as no-vlan
	local use_vlan=1
	for no_vlan_int in $(qmp_uci_get interfaces.no_vlan_devices); do
763
		[ "$no_vlan_int" == "$dev" ] && use_vlan=0
764
	done
765
		
766
	# If vlan tagging
767
	    if [ $use_vlan -eq 1 ]; then
768
769
770
771
                local vid="$(echo $protocol_vid | awk -F':' '{print $2}')"
		local ifname="$dev.$vid"
	
	# If not vlan tagging
772
	    else
773
		local ifname="$dev"
774
775
776
777
778
779
780
781
782
783
	    fi

	    uci set $conf.mesh_$counter="dev"
	    uci set $conf.mesh_$counter.dev="$ifname"

	    if qmp_uci_test qmp.networks.bmx6_ipv4_address ; then
	      local bmx6_ipv4_netmask="$(echo $(uci get qmp.networks.bmx6_ipv4_address) | cut -s -d / -f2)"
	      local bmx6_ipv4_address="$(echo $(uci get qmp.networks.bmx6_ipv4_address) | cut -d / -f1)"
	      [ -z "$bmx6_ipv4_netmask" ] && bmx6_ipv4_netmask="32"
	      uci set $conf.general.tun4Address="$bmx6_ipv4_address/$bmx6_ipv4_netmask"
784
785
786
	      uci set $conf.tmain=tunDev
	      uci set $conf.tmain.tunDev=tmain
	      uci set $conf.tmain.tun4Address="$bmx6_ipv4_address/$bmx6_ipv4_netmask"
787

788
	    else
p4u's avatar
p4u committed
789
	      local ipv4_suffix24="$(qmp_get_id 8bit)"
790
	      local ipv4_prefix24="$(qmp_uci_get networks.bmx6_ipv4_prefix24)"
791
792
793
794
	      if [ $(echo -n "$ipv4_prefix24" | tr -d [0-9] | wc -c) -lt 2 ]; then
	      	ipv4_prefix24="${ipv4_prefix24}.0"
	      fi
	      uci set $conf.general.tun4Address="$ipv4_prefix24.$ipv4_suffix24/32"
795
796
797
	      uci set $conf.tmain=tunDev
	      uci set $conf.tmain.tunDev=tmain
	      uci set $conf.tmain.tun4Address="$ipv4_prefix24.$ipv4_suffix24/32"
798

799
800
801
802
803
804
805
806
807
808
809
	    fi
	    counter=$(( $counter + 1 ))
         fi

       done
    done
  fi


  if qmp_uci_test qmp.networks.bmx6_ripe_prefix48 ; then
    uci set $conf.general.tun6Address="$(uci get qmp.networks.bmx6_ripe_prefix48):$community_node_id:0:0:0:1/64"
810
811
812
    uci set $conf.tmain=tunDev
    uci set $conf.tmain.tunDev=tmain
    uci set $conf.tmain.tun6Address="$(qmp_uci_get networks.bmx6_ripe_prefix48):$community_node_id:0:0:0:1/64"
813
814
  fi

815
  qmp_configure_bmx6_gateways
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831

  uci commit $conf
#  /etc/init.d/$conf restart
}

qmp_set_hosts() {
  echo "Configuring /etc/hosts file with qmpadmin entry"

  local ip=$(uci get bmx6.general.tun4Address | cut -d'/' -f1)
  local hn=$(uci get system.@system[0].hostname)

  if [ -z "$ip" -o -z "$hn" ]; then
 	echo "Cannot get IP or HostName"
	return
  fi

832
  if [ $(cat /etc/hosts | grep -c "^$ip.*qmpadmin") -eq 0 ]; then
833
834
835
836
837
838
839
840
841
842
843
        cat /etc/hosts | grep -v qmpadmin > /tmp/hosts.tmp
        echo "$ip $hn admin.qmp qmpadmin" >> /tmp/hosts.tmp
        cp /tmp/hosts.tmp /etc/hosts
  fi

  echo "done"
}

qmp_configure_system() {

  if qmp_uci_test qmp.node.community_node_id; then
844
    local community_node_id=$(qmp_get_id)
845
  else
846
847
    local community_node_id=$(qmp_get_id)
    qmp_uci_set node.community_node_id $community_node_id
848
  fi
p4u's avatar
p4u committed
849

850
  local community_id="$(qmp_uci_get node.community_id)"
851
  [ -z "$community_id" ] && community_id="qmp" && qmp_uci_set node.community_id $community_id
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867

  # set hostname
  uci set system.@system[0].hostname=${community_id}${community_node_id}
  uci commit system
  echo "${community_id}${community_node_id}" > /proc/sys/kernel/hostname

  # enable IPv6 in httpd:
  uci set uhttpd.main.listen_http="80"
  uci set uhttpd.main.listen_https="443"
  uci commit uhttpd
  /etc/init.d/uhttpd restart

  # configuring hosts
  qmp_set_hosts
}

p4u's avatar
p4u committed
868
869
870
qmp_restart_firewall() {
	/etc/init.d/firewall restart
}
871
872

qmp_check_force_internet() {
873
874
	[ "$(qmp_uci_get networks.force_internet)" == "1" ] && qmp_gw_offer_default
	[ "$(qmp_uci_get networks.force_internet)" == "0" ] && qmp_gw_search_default
875
876
}

877
qmp_configure_initial() {
878
	qmp_hooks_exec firstboot
879
880
881
	qmp_configure_smart_network
}

882
qmp_configure() {
883
  qmp_configure_system
884
  qmp_hooks_exec preconf
885
886
887
888
  qmp_check_force_internet
  qmp_configure_network
  qmp_configure_bmx6
  qmp_configure_lan_v6
889
  qmp_hooks_exec postconf
890
891
}