Developing lightweight computation at the DSG edge

Commit 0aca17fa authored by Roger Pueyo Centelles's avatar Roger Pueyo Centelles
Browse files

[qmp-system] Disable gwck service in default config

Signed-off-by: default avatarRoger Pueyo Centelles <>
parent a1b97b03
......@@ -8,16 +8,16 @@
config 'qmp' 'interfaces'
# Devices for LAN (bridged in br-lan and dhcp-server will be enabled).
option lan_devices ''
# Devices for WAN (dhcp-client will be enabled).
option wan_devices ''
option wan_devices ''
# Devices used for Meshing, by default they will be extended with VLAN tag.
option mesh_devices ''
# Devices that will be excluded of the VLAN tagging.
option no_vlan_devices ''
# Devices that will be ignored (to manage them manually).
option ignore_devices ''
......@@ -27,19 +27,19 @@ config 'qmp' 'interfaces'
config 'qmp' 'node'
# The MAC address of the primary device will be used for calculate ID.
option primary_device 'eth0'
# The node name (human readable).
option device_name 'qMp'
# The node id (2 hex digits). Leave blank to use crc16 from MAC address.
option device_id ''
# Append device_id to device_name in the device hostname
option append_id '1'
# Prepend mesh_name to device_name in the device hostname,
option prepend_cnm '1'
# Temporay key file for session (autogenerated in each boot).
option key '/tmp/qmp_key'
......@@ -59,7 +59,7 @@ config 'qmp' 'services'
option captive_portal 0
option b6m 0
option libremap 0
option gwck 1
option gwck 0
option auto_upgrade 0
option mesh_dns 1
option bwtest 1
......@@ -70,16 +70,16 @@ config 'qmp' 'services'
config 'qmp' 'update'
# Remote URL where the firmware images are placed.
option url ''
# Special remote file which contains a list of firmware:md5hash.
option images 'IMAGES'
# Special remote file which contains a list of device:hash.
option devices 'DEVICES'
# Filter to look for specific firmware images.
option filter 'sysupgrade'
# List of files which are gonna be saved between upgrades.
option preserve '/etc/config/qmp /etc/shadow /etc/passwd /etc/rc.local /etc/firewall.user /etc/dropbear /etc/config/b6m-spread /etc/qmp/.birth /etc/config/gateways /etc/config/mini_snmpd'
......@@ -89,10 +89,10 @@ config 'qmp' 'update'
config 'qmp' 'roaming'
# Enable/disable roaming mode.
option ignore '0'
# DHCP offset for the dhcp server.
option dhcp_offset '2'
# Leasetime for dhcp server.
option qmp_leasetime '1h'
......@@ -102,40 +102,40 @@ config 'qmp' 'roaming'
config 'qmp' 'networks'
# DNS servers which will be configured.
option dns ''
# LAN address and netmask (will be assigned to br-lan).
option lan_address ''
option lan_netmask ''
option disable_lan_dhcp '0'
option disable_mesh_dhcp '1'
# Rescue IPv4 network prefix (/16 bits).
# Rescue IPv4 network prefix (/16 bits).
# Missing 16 bits are taken from primary device MAC.
option rescue_prefix24 '169.254'
option rescue_prefix24 '169.254'
# IPv4 main IP address for the mesh cloud (if blank it will be autogenerated).
# In community mode it may be the same assigned to LAN (network prefix can be specified).
option bmx6_ipv4_address ''
option bmx6_ipv4_address ''
# IPv4 autogeneration main prefix (used if bmx6_ipv4_address not specified).
option bmx6_ipv4_prefix24 '10.202.0'
# Routing protocols and VLAN. Use <proto-name>[:VLAN-ID]. If VLAN-ID not specified, VLAN tags are not used.
option mesh_protocol_vids 'bmx6:12'
# IPv6 prefix (48bits) for internal mesh usage (ULA recommended).
option bmx6_mesh_prefix48 'fd02:0:0'
# IPv6 LAN prefix (48bits) (ULA recommended). It will be announced as a bmx6 tunnel/gateway in the Mesh.
option lan_ula_prefix48 'fd00:1714:1714'
option publish_lan '1'
# IPv6 prefix for public internet (48 bits).
# IPv6 prefix for public internet (48 bits).
# Suffix is autoconfigured based on primary device MAC.
option bmx6_ripe_prefix48 '2012:0:0'
# Metric for WAN interfaces (dhcp client).
# option wan_metric '2048'
# option wan_metric '2048'
# -----------------------------
# Wireless general configuration
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment