Developing lightweight computation at the DSG edge

Commit 911b4444 authored by Victor Oncins's avatar Victor Oncins
Browse files

Reviewed qmp_functions.sh and qmp files to include some new features: logging,...

Reviewed qmp_functions.sh and qmp files to include some new features: logging, new VID assigment and node-id projections onto IPv6 adressing
parent 6bb062d4
......@@ -8,41 +8,29 @@ config qmp interfaces
option mesh_devices 'eth0 ath0' # will be extended by vlan tag! alix: eth0 ath1 ath2, wgt634u: eth0 ath0, ns5: eth0 ath0
config qmp node
# if commented out then last byte of the MAC address is used (0x000-0x0FF):
# option community_node_id 901 # value between 0x0100 and 0xFFFF
# if commented out then last 16-bits of the MAC address is used to minimize collisions
option community_node_id 32 # decimal value between 0 and 4095 (more human-friendly)
option global_prefix48 '2a00:1508:0' # I propouse only one ISP-global-prefix for whole nodes in the community
config qmp networks
option niit_prefix96 '0:0:0:0:0:ffff' # omit trailing 32 ipv4 bits !
option mesh_protocol_vids 'olsr6:1 bmx6:2' # or "olsr6:1 bmx6:2 babel:3", means olsr6 use vlantag 10+1, bmx6 use vlantag 10+2
option mesh_vid_offset '10'
option niit_prefix96 '0:0:0:0:0:ffff' # omit trailing 32 ipv4 bits !
option mesh_protocol_vids 'olsr6:3 bmx6:5' # {protocol canonical name}:[VID]
option mesh_vid_offset '10' # will be used if none VID is supplied by user
option olsr6_mesh_prefix48 'fd01:0:0'
option olsr6_ripe_prefix48 '2011:0:0'
option olsr6_ula_prefix48 'fd01:0:0' # The prefixes must not end with colon!
# option olsr6_global_prefix48 '2a00:1508:0' # Axel supposes two diferents RIR/LIR global prefix per protocol
option olsr6_ipv4_prefix24 '10.201'
# option olsr6_ipv4_address '10.201.9.01'
# option olsr6_ipv4_netmask '255.255.255.0'
# option olsr6_6to4_netmask '120'
option bmx6_mesh_prefix48 'fd02:0:0'
option bmx6_ripe_prefix48 '2012:0:0'
option bmx6_ula_prefix48 'fd02:0:0' # The prefixes must not end with colon!
# option bmx6_global_prefix48 '2a00:1508:1' # Axel supposes two diferents RIR/LIR global prefix per protocol
option bmx6_ipv4_prefix24 '10.202'
# option bmx6_ipv4_address '10.202.9.01'
# option bmx6_ipv4_netmask '255.255.255.0'
# option bmx6_6to4_netmask '120'
option babel_mesh_prefix48 'fd03:0:0'
#This is only a prototype, not implemented!
config qmp wireless1
option driver madwifi
option channel 44 option country 800
option mode mesh
config qmp wireless2
option driver athXk
option channel 10
option country 800 option mode ap
# option babel_ula_prefix48 'fd03:0:0'
This diff is collapsed.
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment