GitLab

 - Use "qmp" prefix for custom feeds in
 - Add uci-defaults script to enable the custom feeds and change their URL

 - Switch defaults
 - Default network settings

[qmp-small-node] Add bmx6-mdns to qmp-small-node (was removed from qmp-tiny-node in 3f81e803)

switched and plain Ethernet devices

 · 5 GHz-only radios: adhoc
 · 2.4 GHz-only radios: adhoc_ap

 · dual band radios:
   - if only radio: adhoc
   - if no other 5 GHz-only radios: adhoc
   - if no other 2.4 GHz-only radios: adhoc_ap
   - if all other radios are dual-band: 1st one adhoc, rest adhoc_ap

 · default (failsafe): adhoc_ap

Ethernet devices (e.g. eth0) if there is a switch on it providing VLANed
devices (e.g. eth0.1, eth0.2)

created on and use the $viface identifier instead of the interface name itself.

This commit fixes issue #377, regarding the ways VLANs are specified in
/etc/config/network. The previous method (with @wlan0-like stuff) was never
meant to work, although it just happened to work. Recent OpenWrt changes
have deprecated that *unsupported* way to declare VLANs. Backporting the
work in branch QinQ and adding a couple of changes (e.g. linklayer details
for BMX6) fixes the problem.

[qmp-system] Fix #375. Do not put tagged VLAN 12 on all switch ports, as it forces tagging on the untagged VLANs

[qmp-system] Fix #361. Add hook for TP-Link TL-WR842N[D]-v2 devices where eth0 and eth1 are swapped:
 - eth0 (blue) => WAN
 - eth1 (yellow) => LAN

[qmp-system] Configure tagged VLAN 12 on the Secondary Ethernet port of NanoStations M5 XW and use it for mesh

[qmp-system] Configure tagget VLAN 12 on the Secondary Ethernet port of NanoStations M5 XW and use it for mesh